We Are Randox | Behind the scenes of Randox Engineering with Maryrose McLoone

Home - We Are Randox | Behind the scenes of Randox Engineering with Maryrose McLoone
maryrose-cropped-image-wearerandox

Randox is an international company renowned for our innovative medical diagnostics but did you know we also have a dedicated engineering team with over 30 years’ experience in the design, prototyping, testing and manufacturing of diagnostic analysers?

Maryrose McLoone, from our Randox Teoranta site, gave us an insight into her role as a mechanical design engineer and told us what she enjoys the most about engineering.

Hi Maryrose, tell me a little about your position and what you do on a day-to-day basis?

I work as a Mechanical Design Engineer in Randox Teoranta where my main role is to aid in the design and development of clinical chemistry analysers. My day-to-day work can vary depending on what stage of a project we’re on. At the minute I’m working on developing concepts for our new project. This involves working with other members of the Engineering team to come up with ideas and designs and develop them into working prototypes. Engineers have many roles including creating designs using 3D modelling software, carrying out testing and analysis, as well as verifying and validating our designs. We work with Manufacturing and also with Quality Assurance to ensure we meet all of the relevant standards which are applicable for the Medical Device Industry.

Are there any challenges in your job? If so, how do you handle them?

When working in R&D, the main challenges we face are in ensuring we develop analysers of the highest quality, which will perform accurate diagnoses, and also are competitive in their market. It is always important that we consider the end user of our devices as the patient is of the upmost importance. Quality is an integral part in all stages of the project from the early design stages right through to product release. We must ensure that we will continually deliver quality in every aspect of our work. This is achieved by conducting thorough testing on all of our designs as well as remaining up-to-date with all of the latest technologies which are available to us.

What is your proudest accomplishment at the job?

As a team, we recently completed the design and development of a semi-automated clinical chemistry analyser, the RX altona, which has been released to market. This is a big accomplishment for our team as it is the result of our combined hard work and efforts. This was the first engineering project to be completed solely in Randox Teoranta, which is why it is such a big achievement for us.

What do you enjoy the most about your job?

As a Mechanical Design Engineer, there is a wide variety in the work that I do. Every day is different and each brings its own challenges. I particularly enjoy working with medical devices as I find that is a very rewarding job. Randox analysers are used worldwide to conduct a wide variety diagnostic tests. By working in the development of clinical chemistry analysers I am part of a team which create devices that improve the healthcare of patients all over the world.

As a Mechanical Design Engineer, I also have the opportunity to work with an interdisciplinary team of Engineers including Mechanical, Electrical, and Embedded Systems Engineers, as well as Software Developers. We also work closely with Manufacturing and Quality Assurance which has allowed me to gain an insight into various aspects of design and development which I would not have previously experienced.

What advice would you give someone who is seeking the same line of work?

Design Engineering involves creating innovative solutions and improving on current designs; therefore problem solving is a key skill in this line of work. The design and development stages involve a lot of creativity, whereas the testing stages of a project require meticulous attention to detail. As an Engineer you work autonomously as well as part of a team. You also work alongside Engineers of different disciplines and other departments within the plant. The design and development of a product can be a lengthy and sometimes challenging process but it is also very rewarding when you see a project through to completion.

If you are interested in joining our Engineering team make sure that you check our our careers website for all our current opportunities.

Make sure to follow Randox Careers on Facebook, Twitter and Instagram to stay up-to-date with the hashtag #WeAreRandox


Request a meeting
×
Make an Enquiry - RX series
×
Make an Enquiry - Reagents
  • This field is for validation purposes and should be left unchanged.
×
Kit Insert Request - Reagents
×
Kit Insert Request - Reagents
×
Make an Enquiry - Reagents
×
Make an Enquiry - Quality Control
×
Make an Enquiry - RIQAS
×
Make an Enquiry - RIQAS
×
Make an Enquiry - Quality Control
×
Make an Enquiry
×
Make an Enquiry - Biochip
  • This field is for validation purposes and should be left unchanged.
×
Make an Enquiry - Molecular
  • This field is for validation purposes and should be left unchanged.
×
Make an Enquiry - Future Diagnostics
×
Make an Enquiry - RX series (Product)
×
Make an Enquiry - Quality Control
×
Make an Enquiry - RIQAS
×
Make an Enquiry - Reagents
×
Por favor, introduzca sus datos para ver nuestro último seminario
×